# Colloidal Silver 50 ppm (500 ml) – Pure Silver Water

- Link: https://naturalcure.de/en/colloidal-silver-50-ppm-500ml/
- Published: 2025-06-20T17:55:01+02:00
- Author: Kosmetik Shop

## Colloidal Silver 50 ppm (500 ml): High-Purity Silver Water in Laboratory Quality

With **colloidal silver 50 ppm in a 500 ml amber glass bottle** (commonly referred
to as **silver water** or _silver sol_), you receive a high-purity, electrostatically
stable precious metal dispersion. Manufactured from **99.99% pure fine silver** 
and laboratory-grade Type 1 ultrapure water, this silver colloid is completely free
from chemical additives, stabilizers, and chlorides. Each batch is freshly produced
to ensure optimal charge potential and physical suspension stability.

## What Is Colloidal Silver and What Does 50 ppm Mean?

### Physicochemical Properties of Silver Dispersion

From a scientific standpoint, **colloidal silver** is not a dissolved chemical solution,
but a dispersed two-phase system: microscopically small, elemental silver particles(
nanoparticles) and silver ions remain suspended in demineralized ultrapure water
in a permanent state of equilibrium.

 * **Pure Precious Metal:** Unlike synthetic silver compounds (such as silver nitrate
   or silver chloride), genuine electrolytically produced silver water consists 
   solely of pure water and elemental fine silver particles.
 * **Nanometer Scale & Zeta Potential:** Individual silver clusters have a diameter
   between 1 and 15 nm. Because these particles carry identical electrical charges(
   _zeta potential_), they mutually repel each other. Together with _Brownian motion_,
   this electrostatic repulsion prevents aggregation and sedimentation.
 * **Optical Characteristics & Tyndall Effect:** High-purity colloidal silver at
   50 ppm exhibits a clear to slight golden-yellowish tint caused by _surface plasmon
   resonance_, where nanoparticles absorb and refract light. When illuminated with
   a focused laser beam, light scattering along the suspended particles becomes 
   visible (_Tyndall effect_).

### Concentration of 50 ppm Explained

The unit **ppm** stands for _parts per million_ and represents the exact mass ratio
of fine silver to ultrapure water:

 * **1 ppm** equals 1 milligram (mg) of silver per 1 liter (kg) of water.
 * **50 ppm** corresponds to **50 milligrams of pure fine silver per liter of water**,
   meaning a 500 ml bottle contains exactly **25 milligrams of pure fine silver**
   in dispersion.

#### Characteristics of the 50 ppm Formulation

While standard formulations often feature lower concentrations (10 to 25 ppm), **
colloidal silver 50 ppm** offers higher particle density alongside robust physical
suspension stability. The **500 ml stock bottle** provides sufficient liquid volume
to maintain spatial distance between colloids, preserving the electrostatic charge
balance over time.

## Production: Controlled Electrolysis with 99.99% Fine Silver

The stability and chemical integrity of colloidal silver depend directly on production
parameters and the purity of raw components. Each unit is prepared under controlled
laboratory conditions.

### Gentle Electrolysis Without Chemical Reducing Agents

 * **Certified Fine Silver Electrodes:** Two electrodes of certified 99.99% fine
   silver (Four Nines Fine) are immersed in laboratory-grade water, excluding contamination
   from base metals like copper, nickel, or lead.
 * **Regulated Current Flow:** A calibrated electrolysis setup releases microscopic
   silver particles directly from the metallic grid into the liquid carrier.
 * **No Additives:** Suspension stability is achieved through particle charge alone,
   requiring zero proteins, citrates, stabilizing salts, or preservatives.
 * **Type 1 Ultrapure Water:** Multiple-distilled and deionized water with an electrical
   conductivity below 0.1 µS/cm prevents premature ionic precipitation.
 * **Pharmaceutical Amber Glass:** Packaging in 500 ml light-blocking amber glass
   protects photosensitive particles against degradation from UV radiation.

## Storage and Handling Instructions

Because colloidal silver 50 ppm relies on an electrostatic balance, proper storage
preserves the integrity of the dispersion:

 * **Store in a Dark Place:** Keep the amber glass bottle closed inside an opaque
   cabinet to minimize exposure to direct sunlight and UV radiation.
 * **Maintain Room Temperature (15–22 °C):** Do not refrigerate or freeze the product.
   Low temperatures reduce Brownian motion and can lead to particle agglomeration.
   Keep away from heat sources.
 * **Keep Clear of Electromagnetic Fields:** Store away from microwave ovens, Wi-
   Fi routers, mobile phones, and heavy electrical appliances to avoid charge disruption.
 * **Avoid Foreign Contact:** Do not introduce metallic spoons, standard tap water,
   or foreign liquids into the bottle, as ionic contaminants will destabilize the
   colloidal suspension.

### Legal Notice & Classification

Colloidal silver is a technical and laboratory-chemical raw material and research
product. In accordance with the applicable regulations of the European Union (in
particular the Novel Food Regulation (EU) 2015/2283), colloidal silver is not approved
as a food or food supplement. The sale and supply are carried out exclusively for
technical, scientific, analytical, or further processing purposes as laboratory 
supplies.